Measures to avoid new scratches in the grinding of plane wire drawing machine

2023-11-07

Measures to avoid new scratches in the grinding of plane wire drawing machine

When using a flat wire drawing machine to wire the product, sometimes there will be defects such as coarse grains, fine sandpaper marks, and flow marks on the surface. To avoid new scratches on the product surface caused by particle dust, first of all, before polishing, the automatic plane wire drawing machine should use 600# to 1000# water sandpaper dipped in water to wrap a small rubber lining block, and gently polish it until it is flat. Be careful not to wear through the paint.
Then, use a machine grinder to add coarse grinding paste to rough ground the traces of water sandpaper, add grinding paste for polishing and fine grinding, and use a mechanical automatic plane wire drawing machine for wire drawing. In addition, adding a mirror treatment agent to remove the marks left by the rough abrasive paste, the polishing machine can achieve the effect of mirror polishing of the paint film.
After grinding and polishing, wipe off the grinding and polishing paste, immediately use cotton yarn dipped in varnish wax to wipe all the polished parts, and then use dry cotton yarn to wipe off the excess glazing wax, so that the paint surface is bright and dazzling like a mirror. The plane wire drawing machine is a precision metal wire drawing equipment, which has the characteristics of high degree of automation, high production efficiency and good wire drawing accuracy.

Prev : Wat is de classificatie en hoofdstructuur van de draadtrekmachine?

Next : Voordelen van een watermolendraadtrekmachine ten opzichte van de fabriekstoepassingscapaciteit

Contact us to discuss your fertilizer project with our experts